JURA X10 Cleaning & Video Guides

← All How guides

Daily cleaning steps, descaling, filter changes and official JURA videos for the JURA X10 professional coffee machine. Videos by JURA.

Watch: X10 – Milk system cleaning

Watch this first: JURA’s daily milk system clean for the X10.

How to clean the JURA X10 (daily)

What you’ll need:

  1. Pull out the drip tray. Empty the coffee grounds container and drip tray and rinse both with warm water, then refit them. (Empty the grounds container while the machine is on, so the counter resets.)
  2. Rinse the water tank and refill it with fresh, cold water.
  3. Clean the milk system: when Clean the milk system shows, touch it, then follow the screen. Take the milk pipe out of the milk container or cooler, add 1 dose of JURA milk system cleaner to the rear part of the cleaning container, place it under the dual spout, connect the milk pipe and touch Start. It stops by itself when done.
  4. Take the milk pipe off and rinse it under running water.
  5. Dismantle and rinse the dual spout: pull the cover forwards and off, remove the milk system, take it apart and rinse all parts under running water. Put it back together, press it firmly into the spout, refit the cover and reconnect the milk pipe.
  6. Wipe the outside of the machine with a clean, soft, damp cloth.

JURA says to clean the milk system every day you’ve made milk drinks. Use only JURA maintenance products.

Cleaning the JURA X10 with a cleaning tablet

After 180 drinks or 80 switch-on rinses the X10 asks you to clean it. The program takes about 20 minutes – don’t interrupt it. You’ll need one JURA cleaning tablet.

  1. When Clean machine shows, touch it, then Clean and Start.
  2. Empty the drip tray and grounds container and refit them. Place a container under the dual spout and touch Next.
  3. When it asks to Add cleaning tablet, open the filler funnel cover, drop in one JURA cleaning tablet, close the cover and touch Next.
  4. When it stops, empty the drip tray and grounds container again and refit them.

Descaling the JURA X10

If you use a CLARIS Pro Smart filter, the machine won’t ask you to descale. Without a filter, it will prompt you when needed. Descaling takes about 45 minutes and must not be interrupted. You’ll need 3 JURA descaling tablets.

  1. When Decalcify machine shows, touch it, then Descale and Start. Empty the drip tray and grounds container and refit them.
  2. Remove and empty the water tank. Fully dissolve 3 JURA descaling tablets in 600 ml of water, pour it into the tank and refit it.
  3. Place containers under the dual spout and the hot-water spout and touch Next.
  4. When it stops, empty the drip tray and grounds container, empty the containers and put them back, rinse the water tank, fill it with fresh cold water, refit it and touch Next.
  5. Follow the screen until descaling is complete, then empty the drip tray and grounds container.

Changing the CLARIS Pro Smart filter

When the machine asks you to change the filter: remove and empty the water tank, open the filter holder, take out the old CLARIS Pro Smart cartridge and push in a new one. Close the holder, fill the tank with fresh cold water and refit it. The machine detects the new filter and rinses it, then asks you to empty the drip tray. Order a CLARIS Pro Smart filter.

More JURA X10 video guides

X10 – Cleaning (X10)

The cleaning tablet program the X10 asks for after 180 drinks.

X10 – Descaling (X10)

Descaling with JURA descaling tablets, if you don’t use a CLARIS filter.

X10 – Filter change (X10)

Fitting a new CLARIS Pro Smart filter cartridge.

Reorder cleaning products

Prefer to order by phone? Call us on 1300 357 575.

Need a hand?

Call Coffee Machines and Beans on 1300 357 575, or book a service or see the JURA X10 in our shop.
1/48 Shandan Circuit, Albion Park Rail NSW 2527

Servicing: home users should have their machine serviced every 12 months; cafés and other busy commercial sites at least every 6 months.

Videos are by JURA and are played from their official YouTube channel, JURA. Written steps are based on the JURA X10 Instructions for Use and JURA’s videos.